RFID

Radio Frequency Identification Detection - Assignment

[Module Code]



[Student's Code]

[Dated]Executive Summary

Four years the market used the popularly known barcodes for automatic identification of products, although this technology has a number of drawbacks including stand that cannot be rescheduled, the information stored in them is limited and is very dull reading.

As industries have grown, and the market has become more demanding needs have arisen that require an immediate response. Thus, was born the RFID technology, to provide an effective method for the current market.

Therefore, those with the lowest cost offer a lower frequency range, thus allowing a short distance use, while the higher-value RFID systems use higher frequencies, providing the ability to read faster and farther. In general, RFID tags are low frequency used in much of the world for the identification of animals, anti- theft system for vehicles and the like. Instead, the labels that work at high frequencies are used in business to track products, as well as in various institutions in devices such as personal badges, baggage tracking, books, and more.

Table of Content

Introduction3

Applications4

Traffic systems4

Perimeter control4

Supply chain management4

Asset tracking HF4

Used to improve efficiency and quality5

RFID in Construction and Engineering5

Executive summary6

Reference7

Radio Frequency Identification Detection

Introduction

Radio Frequency Identification (RFID) is the utilization of a connecting without wires with non-make contact with a system that uses radio frequency electromagnetic fields to transfer information from top of the marked object for the reason of automatic tracking and detection system. Mostly of mark heads needed no external source and become excited by using electromagnetic spectrums which is essential to interpret these waves. Additional other devices use limited power or some other external sources to emit radiations (electromagnetic pattern at different radio waves). The tag consist of electronically accumulate data which can be interpret and identify from various meters (yard) away. Just like a bar code, whose tag does not require being within line of sight of the observer's and may be surrounded with the substance in link.

These mark heads are variously used in many optical industries and organizations. During the production of an automobile these mark heads are attached with RIFD'S which is used to identify its process of development during the assembly line. Since RFID'S mark heads can be attached to property, outfits, or sometimes fixed with in people, the option of interpretation individually connected data without permission has raised isolation distress.

An RDIF mark head is a microprocessor which is mutually connected with an aerial system in a compressed packing, the structure of this packing allows the RFID mark head to a couple with a substance which is tracked by RFID receiver. The tag quickly gets signal from RFID'S scanner and divert receiving signal to the receiver with some supplementary information like a particular arrangement number or other related information. RFID'S mark heads are small in size as compared to others sensors.

Discussions

One of the major variations between bar code and RFID technology is RFID required to reduce the line of view interpretation that technology of reading coding of different bar codes depends ...